Suntan Tell You Round and Oval Motor Run Capacitors

November 19, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors

Some customer would be confused by can I use a round run capacitor in place of an oval run capacitor? The answer is positive.

The only difference between round and oval capacitors is the case. There is no electrical difference. 

As long as the replacement will fit within the space provided, the case shape is irrelevant.

In Suntan website we only show round motor running capacitors for CBB60 series from TS11-22 to TS11-26. 

But in our production line, we are able to produce oval motor running capacitors, please send us your enquiry once you need them.
 
For more details please check :http://www.suntan.com.hk/Motor-Capacitors/
 

More..Motor CapacitorsSu  Suntan  Motor Running Capacitors  CBB61  CBB60  CBB65  CD60  

Suntan Telles You How Long Your Run Capacitor Last

November 17, 2015 Views
Comments 0

Suntan Technology Company Limited

---All Kinds of Capacitors

The mid point for a good quality aftermarket (didn't come with your motor) run capacitor would be 3,000 to 30,000 running hours.
Suntan usually produce motor running capacitors with 10,000 running hours. If you have special request, please contact with our sales.

In highly competitive industries where every part can have a significant impact on cost, or where a motor's intended use would likely be intermittent and infrequent. 
10,000 running hours are usually be choosen for this design.
A lower grade of run capacitor may be selected with a design life of as little as 3000 hours.
 
For more details please check : http://www.suntan.com.hk/Motor-Capacitors/ 
 

More..Motor CapacitorsSu  Suntan  Motor Running Capacitors  CBB61  CBB60  CBB65  CD60  

Suntan Telles Do You Need a Replacement Capacitor With One Resistor

October 20, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
My start capacitor has a resistor on it. Do I need a replacement capacitor with one?
Most replacement start capacitors will not include a resistor. You can check the condition of the old one by checking the resistance value, or just replace it with a new one. 
This should read somewhere around 10-20k Ohms and around 2 watts. The resistors are usually either soldered or crimped to the terminals. 
The purpose of the resistor is to bleed off residual voltage in the capacitor after it has been disconnected from the circuit after motor start up. 
Not all start capacitors will use one, as there are other ways to accomplish this. 
The important part is if your original capacitor had one, you'll need to replace it on the new capacitor.

For more details please check:
http://www.suntan.com.hk/Motor-Capacitors/TS13D3-CD60-Motor-Starting-Capacitor.html

More..Motor CapacitorsSu  Suntan  CD60  Motor Starting Capacitor  TS13D3-CD60  

Suntan Expand Production for Motor Running Capacitors and Motor Starting Capacitors

October 3, 2014 Views
Comments 1
Suntan Technology Company Limited
---All Kinds of Capacitors
 
Since year 2001, Suntan only can produce limited types of CBB61 motor running capacitors. As the time goes by, we produce more and more different types of CBB60 and CBB61 products.
In year 2008, we become to produce CBB65 capacitor too. In year 2014, we successfully expand our production line to CD60 motor starting capacitors.
 
Start capacitors briefly increase motor starting torque and allow a motor to be cycled on and off rapidly. A start capacitor stays in the circuit long enough to rapidly bring the motor up to a predetermined speed, which is usually about 75% of the full speed, and is then taken out of the circuit, such as by a centrifugal switch that releases at that speed, afterward the motor works more efficiently with a "run capacitor".
 

More..Plastic Film CapacitorSu  Suntan  Expand Production  Motor Running Capacitors  Motor Starting Capacitors  TS11  CD60  

分页:[«]1[»]