Suntan Blog

Suntan Technology Company Limited
---All Kinds of Capacitors

As you know, since Jan. 1st 2013 we have an updating of ROHS regulation as for new directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS Recast). 

By now almost all of our parts are made in this RoHS2 compliance.

Following we list the product series which we meet RoHS2 so that all the customers can easily check it.

Plastic Film Capacitors: TS01,TS02,TS02B,TS03,TS04,TS05(S),TS05N,TS06,TS07,TS07B,TS08,TS08S,TS09,TS10 
Ceramic Capacitors : TS15,TS16,TS17,TS18(H),TS22
SMD Aluminum Electrolytic capacitors : TS13C series
Tantalum Capacitors : TS19,TS20 (Black & Yellow)
Ceramic Trimmer Capacitor: TSC3S
Trimming Potentiometers
Varistor (Dipped & SMD)
Crystal
Diode: M7, LL4148
Gold Capacitor: TS12

For other series which you can not find above, please specially go to our sales to check more information or send request sales@suntan.com.hk

Suntan Technology Company Limited
---All Kinds of Capacitors

 Ceramic capacitors are suitable for moderately high-frequency work (into the high hundreds of megahertz range, or, with great care, into the low gigahertz range), as modern ceramic caps are fairly non-inductive compared to the other major classes of capacitors (film and electrolytic). Capacitor technologies with higher self-resonant frequencies tend to be expensive and esoteric (typically, mica or glass capacitors).

Our Capacitance Change VS Temperature Characteristic; Voltage; Frequency has introduced Ceramic capacitors in detail ,If you want to find some special demand, please visit www.suntan.com.hk ,I am sure that our Ceramic capacitors and other products can make you feel satisfied.

Ceramic capacitors are constructed with materials such as titanium acid barium used as the dielectric. Internally, these capacitors are not constructed as a coil, so they can be used in high frequency applications. Typically, they are used in circuits which bypass high frequency signals to ground.

These capacitors have the shape of a disk. Their capacitance is comparatively small.

• The capacitor on the left is a 100pF capacitor with a diameter of about 3 mm.
• The capacitor on the right side is printed with 103, so 10 x 103pF becomes 0.01 µF. The diameter of the disk is about 6 mm.
• Ceramic capacitors have no polarity.
• Ceramic capacitors should not be used for analog circuits, because they can distort the signal.