Suntan:How to Read trimming potentiometer ?

January 30, 2012 | tags Suntan Trimming Potentiometer   | views
Comments 0

To read a potentiometer, you need a multimeter. Put in on the proper ohmmeter setting, which should be higher than that of the resistance rating of the potentiometer as noted on the package or the device. If you don't know the resistance rating, use the lowest setting of the multimeter and increase it until you get a reading.
When reading the potentiometer, one multimeter lead must always be on the wiper or middle part, and the other one can be on either of the remaining terminals. For example, place one multimeter lead on the wiper, and the other on the left terminal of the potentiometer. If you place one lead on the left terminal and the other on the right, you will read the entire value of the pot, and the resistance will not vary when you turn the knob.
Note that Inexpensive ones may approximate only fifty percent of their rated value when they are measured.
we can offer all kinds of trimming potentiometers accept very small quantity with very competetive price, the delivery time is 2 weeks around. With our good support, our sales is keep increasing each month.Any questions ,please contact us at once.

Post Comments: