Suntan Blog

The multilayer ceramic capacitor has a many-layered dielectric. These capacitors are small in size, and have good temperature and frequency characteristics.

Square wave signals used in digital circuits can have a comparatively high frequency component included.

This capacitor is used to bypass the high frequency to ground.

• In the photograph, the capacitance of the component on the left is displayed as 104. So, the capacitance is 10 x 104 pF = 0.1 µF. The thickness is 2 mm, the height is 3 mm, the width is 4 mm.
• The capacitor to the right has a capacitance of 103 (10 x 103 pF = 0.01 µF). The height is 4 mm, the diameter of the round part is 2 mm.
• These capacitors are not polarized. That is, they have no polarity.

Ceramic capacitors are constructed with materials such as titanium acid barium used as the dielectric. Internally, these capacitors are not constructed as a coil, so they can be used in high frequency applications. Typically, they are used in circuits which bypass high frequency signals to ground.

These capacitors have the shape of a disk. Their capacitance is comparatively small.

• The capacitor on the left is a 100pF capacitor with a diameter of about 3 mm.
• The capacitor on the right side is printed with 103, so 10 x 103pF becomes 0.01 µF. The diameter of the disk is about 6 mm.
• Ceramic capacitors have no polarity.
• Ceramic capacitors should not be used for analog circuits, because they can distort the signal.