Spark gaps as protective devices

December 14, 2010 Views
Comments 0

Smaller spark gaps are often used to protect sensitive electrical or electronic equipment from high voltage surges. In sophisticated versions of these devices (called gas tube arresters), a small spark gap breaks down during an abnormal voltage surge, safely shunting the surge to ground and thereby protecting the equipment. These devices are commonly used for telephone lines as they enter a building; the spark gaps help protect the building and internal telephone circuits from the effects of lightning strikes. Less sophisticated (and much less expensive) spark gaps are made using modified ceramic capacitors; in these devices, the spark gap is simply an air gap sawn between the two lead wires that connect the capacitor to the circuit. A voltage surge causes a spark which jumps from lead wire to lead wire across the gap left by the sawing process. These low-cost devices are often used to prevent damaging arcs between the elements of the electron gun(s) within a cathode ray tube (CRT).

Suntan ( www.suntan.com.hk ) has supply Spark Capacitors .The Spark Capacitors - TS21 features are: Spark gap capacitors are designed to provide a reliable discharge path for stray, transient over voltages and static voltage build-up. The construction of the spark gap enable the circuit designer to reduce cost by specifying lower voltage components with the assurance that over-voltage conditions will be prevented.

More..Ceramic Capacitor

Ceramic capacitor basics

December 9, 2010 Views
Comments 0

Ceramic capacitors are the workhorses of the capacitor world these days. Ceramic capacitors are used in millions as a result of a combination of their cost and performance. There is a wide variety of dielectrics that can be used, but as the name of the ceramic capacitor suggests, they are all ceramic in nature.

In order to ensure that sufficient levels of capacitance can be obtained within a single capacitor package, ceramic capacitors, like types of capacitor have multiple layers. This increases the level of capacitance to enable the required values of capacitance to be achieved.

More..Ceramic Capacitor

Ceramic Capacitor's HF use

December 1, 2010 Views
Comments 0

Ceramic capacitors are suitable for moderately high-frequency work (into the high hundreds of megahertz range, or, with great care, into the low gigahertz range), as modern ceramic caps are fairly non-inductive compared to the other major classes of capacitors (film and electrolytic). Capacitor technologies with higher self-resonant frequencies tend to be expensive and esoteric (typically, mica or glass capacitors).

Suntan is a Hong Kong based manufacturer of Ceramic Capacitors. Including High Voltage Ceramic Capacitors, Multilayer Ceramic Capacitors, Ceramic Disc Capacitors, Mini Type Ceramic Capacitors etc.

More..Ceramic Capacitor

Suntan High-Frequency of Ceramic Capacitors

November 22, 2010 Views
Comments 0

Suntan Technology Company Limited
---All Kinds of Capacitors

 Ceramic capacitors are suitable for moderately high-frequency work (into the high hundreds of megahertz range, or, with great care, into the low gigahertz range), as modern ceramic caps are fairly non-inductive compared to the other major classes of capacitors (film and electrolytic). Capacitor technologies with higher self-resonant frequencies tend to be expensive and esoteric (typically, mica or glass capacitors).

Our Capacitance Change VS Temperature Characteristic; Voltage; Frequency has introduced Ceramic capacitors in detail ,If you want to find some special demand, please visit www.suntan.com.hk ,I am sure that our Ceramic capacitors and other products can make you feel satisfied.

Su Suntan Multilayer Ceramic Capacitors

March 10, 2009 Views
Comments 0

Suntan Technology Company Limited
---All kinds of Capacitors

The multilayer ceramic capacitor has a many-layered dielectric. These capacitors are small in size, and have good temperature and frequency characteristics.

...

Su Suntan Ceramic Capacitors

March 10, 2009 Views
Comments 0

Ceramic capacitors are constructed with materials such as titanium acid barium used as the dielectric. Internally, these capacitors are not constructed as a coil, so they can be used in high frequency applications. Typically, they are used in circuits which bypass high frequency signals to ground.

These capacitors have the shape of a disk. Their capacitance is comparatively small.

  • The capacitor on the left is a 100pF capacitor with a diameter of about 3 mm.
  • The capacitor on the right side is printed with 103, so 10 x 103pF becomes 0.01 µF. The diameter of the disk is about 6 mm.
  • Ceramic capacitors have no polarity.
  • Ceramic capacitors should not be used for analog circuits, because they can distort the signal.

 

分页:[«][1][2][3][4][5][6][7]8[»]