Suntan RoHS2 Compliance Declaration

May 27, 2013 Views
Comments 0

Suntan Technology Company Limited
---All Kinds of Capacitors

As you know, since Jan. 1st 2013 we have an updating of ROHS regulation as for new directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS Recast). 

By now almost all of our parts are made in this RoHS2 compliance.

Following we list the product series which we meet RoHS2 so that all the customers can easily check it.

Plastic Film Capacitors: TS01,TS02,TS02B,TS03,TS04,TS05(S),TS05N,TS06,TS07,TS07B,TS08,TS08S,TS09,TS10 
Ceramic Capacitors : TS15,TS16,TS17,TS18(H),TS22
SMD Aluminum Electrolytic capacitors : TS13C series
Tantalum Capacitors : TS19,TS20 (Black & Yellow)
Ceramic Trimmer Capacitor: TSC3S
Trimming Potentiometers
Varistor (Dipped & SMD)
Crystal
Diode: M7, LL4148
Gold CapacitorTS12

For other series which you can not find above, please specially go to our sales to check more information or send request sales@suntan.com.hk

Suntan Presents the Last Five Plastic Film Capacitors

May 13, 2013 Views
Comments 0

Suntan Technology Company Limited
---All Kinds of Capacitors

In the last blog, we describesd four types of plastic film capacitaors of medium, application and disadvantage. Suntan presents the last five plastic film capacitors for our customers today.

Capacitor type

Dielectric used

Features/applications

Disadvantages

Polypropylene Plastic Film Capacitors

Polypropylene

Has become the most popular capacitor dielectric[citation needed]. Extremely low dissipation factor, higher dielectric strength than polycarbonate and polyester films, low moisture absorption, and high insulation resistance. May use plates of foil, metalized film, or a combination. Film is compatible with self-healing technology to improve reliability. Usable in high frequency applications due to very low dielectric losses. Larger value and higher voltage types from 1 to 100μF at up to 440V AC are used as run capacitors in some types of single phase electric motors.

More susceptible to damage from transient over-voltages or voltage reversals than oil-impregnated Kraft paper for pulsed power energy discharge applications.

Polysulphone Plastic Film Capacitors

Polysulfone

Similar to polycarbonate. Can withstand full voltage at comparatively higher temperatures. Moisture pick-up is typically 0.2%, limiting its stability.

Very limited availability and higher cost

PTFE Fluorocarbon (TEFLON) Film Capacitors

Polytetra- fluoroethylene

Lowest loss solid dielectric. Operating temperatures up to 250°C, extremely high insulation resistance, and good stability. Used in stringent,

Large size (due to low dielectric constant), and higher cost than other film capacitors.

Polyamide Plastic Film Capacitors

Polyamide

Operating temperatures of up to 200°C. High insulation resistance, good stability and low dissipation factor.

Large size and high cost.

Metalized Plastic Film Capacitors

Polyester or Polycarbonate

Reliable and significantly smaller in size. Thin metalization can be used to advantage by making capacitors "self healing".

Thin plates limit maximum current carrying capability.


Suntan TS08S----- New Approvals for VDE, ENEC

July 24, 2012 Views
Comments 0

Suntan Technology Company Limited
----All Kinds of Capacitors

TS08S series - X2 safety capacitor which is our strong item has new update: we have got more certificates for all our 275VAC, 305VAC, 310VAC till now, like VDE, ENEC & UL certificate, accordingly our products will have new print on the body, here attached our new pictures for your reference, we will offer such products with our SUNTAN brand from now on.
 
Hope such approvals can help you and us meet more business!

More..Plastic Film CapacitorSu  Suntan  plastic film capacitors  TS08S  X2 safety capacitor  VDE  ENEC  

Suntan share market information :X2-MPX Capacitor Manufacturer list

June 19, 2012 Views
Comments 0

Suntan Technology Company Limited
----All Kinds of Capacitors

X2-MPX Capacitor, metallized polypropylene capacitors are ideal for filters, power supplies applications.
 
Classes X1, X2, and Y were originally defined by the IEC in IEC 60384-14.  CENELEC has adopted EN 132400 (technically equivalent to, but structurally different from IEC 384-14 2nd edition), which now defines seven classes of line-filter capacitors.  Class X1 capacitors are impulse tested to 4 kV (higher for capacitors over 1.0 uF).  Class X2 capacitors are impulse tested to 2.5 kV (higher for capacitors over 1.0 uF).  Capacitors conforming to IEC60384-14 normally also conform to EN132400, and vice versa, and should be accepted in all European countries.

Jenn Fu: www.jefu.com.tw
Tenta: www.tenta.com.tw
Suntan : www.suntan.com.hk
Kemet: www.kemet.com
Epcos: www.epcos.com
Pilkor: www.pilkor.net
jb Capacitors: www.jbcapacitors.com
Wima: www.wima.com/
AVX: www.avx.com
Vishay : www.vishay.com

 
Suntan Hot Selling: Metallized Polypropylene Film Capacitor - X2 - TS08s
http://www.suntan.com.hk/Plastic-Film-Capacitors/TS08S.html

Suntan Life Of Sparebots – An Unique And Exceptional Art

May 26, 2012 Views
Comments 0

Suntan Technology Company Limited
----All Kinds of Capacitors

Creativity knows no bounds and this seems to be true in the case of Sparebots. Sparebots are more commonly referred to as Life of Sparebots.

Sparebots are actually spare bits and as the name suggests are actually bits of spare electronic parts. These spare parts may be bits of wire, solder, resistors, leads, diodes and capacitors; used creatively to depict beautiful Sparebots.

 The spare bits are arranged in such a way that they look like real life forms. A spare battery may form the body of a Sparebot, while wires may be twisted to look like its arms and legs. Thus a sparebot is formed and this may look realistic too.

There are a number of photographs on the life of Sparebots. These photographs highlight the creativity with which Sparebots are made. These Sparebots depict common life activities in new light. The sparebots are fast becoming a rage on the internet as many people find them interesting and funny.http://www.suntan.com.hk/

Suntan Plastic Film Capacitors 2

March 7, 2012 Views
Comments 0

Suntan Technology Company Limited
----All Kinds of Capacitors

Suntan is a Hong Kong based manufacturer of Plastic Film Capacitors, including Green Polyester Film Capacitor, Metallized Polyester Film Capacitor, Mini BOX metallized Film Capacitor, X2 Capacitor, Metallized Polyester Film Capacitor and Polystyrene Film Capacitor etc. Please refer to below product list of Plastic Film Capacitors.

Metallized Polyester Film Capacitor - Stacked & Uncoated - TS05N
METALLIZED POLYESTER FILM CAPACITOR
UNCOATED, STACKEDCONSTRUCTION, SMALLSIZE
Metallized Polyester Film Capacitor - Stacked & Uncoated Features
1. Uncoated, stacked construction
2. Small size
3. Applied to DC impulse and pulse circuits

Metallized Polyester Film Capacitor - Stacked - TS05S
METALLIZED POLYESTER FILM CAPACITOR – STACKED
NON – INDUCTIVE, PLASTIC CASE AND EPOXY RESIN
Metallized Polyester Film Capacitor - Stacked Features
1. High dv / dt ability and small. size due to stacked. construction.

Metallized Polypropylene Film Capacitor - X2 - TS08
METALLIZED POLYPROPYLENE FILM CAPACITOR – X2
NON – INDUCTIVE, (UL940V-0) PLASTIC CASE SEALED WITH EPOXY RESIN
Metallized Polypropylene Film Capacitor - X2 Features
1. Provides interference suppression with UL, VDE, CSA, SEMKO, DEMKO, NEMKO, SEV, FIMKO safety approvals.

Metallized Polypropylene Film Capacitor - X2 - TS08S
METALLIZED POLYPROPYLENE FILM CAPACITOR – X2
NON – INDUCTIVE, (UL940V-0) PLASTIC CASE SEALED WITH EPOXY RESIN
Metallized Polypropylene Film Capacitor - X2 Features
1. Provides interference suppression with CE & TUV and UL safety approvals.
2. High dv/ dt capabilities.

 
 

Suntan Plastic Film Capacitors 1

March 7, 2012 Views
Comments 0

Suntan Technology Company Limited
----All Kinds of Capacitors

Suntan is a Hong Kong based manufacturer of Plastic Film Capacitors, including Green Polyester Film Capacitor, Metallized Polyester Film Capacitor, Mini BOX metallized Film Capacitor, X2 Capacitor, Metallized Polyester Film Capacitor and Polystyrene Film Capacitor etc. Please refer to below product list of Plastic Film Capacitors.

High Voltage Metallized Polypropylene Film Capacitor - TS09
HIGH VOLTAGE METALLIZED POLYPROPYLENE FILM CAPACITOR
EXTENDED FOIL, FLAME RETARDANT EPOXY COATED
High Voltage Metallized Polypropylene Film Capacitor Features
1. Ideal for high AC current applications, such as CRT deflection for R-F generators and pulse-forming networks.
2. Temperature Coefficient is negative and variety linear over the operation temperature.
3. Coated with flame retardative epoxy resin which provides from humidity and mechanical damage.

Box-type Double Sided Metallized Polypropylene Film Capacitor - TS09B
METALLIZED POLYPROPYLENE FILM CAPACITOR
BOX - TYPEDOUBLESIDED
Box-type Double Sided Metallized Polypropylene Film Capacitor Features
1. Double sided metallized structure, widely used in high voltage, high frequency and pulse circuit.
2. Low loss and small inherent temperature rise.
3. Negative temperature coefficient of capacitance.
4. Excellent active and passive flame resistant abilities.

Polystyrene Film Capacitor - PSA & PSR - TS10
POLYSTYRENE FILM CAPACITOR-PSA&PSR
INDUCTIVE, AXIAL AND RADIAL, WELDED LEAD STYLE
Polystyrene Film Capacitor - PSA & PSR Features
1. Low dissipation factor and high Insulation Resistance..
2. High stability of capacitance and DF versus temperature and frequency.
3. High precision of capacitance is available

Motor Starting Capacitor - TS11
MOTOR STARTING CAPACITOR
ELECTRICAL APPARATUE USE METALIZED FILM WITH PRECISELY QUALITY CONTROL
Motor Starting Capacitor Features
1. High safey. High reliability.
2. High I.R. (Insulation Resistance) small size.
3. Low D.F. (dissipation factor), lower temperature rise.
4. Durability and characteristics of frequency, etc..

 
 

 

Suntan Supply All Kinds Of Capacitors

November 21, 2011 Views
Comments 0

Suntan Technology Company Limited
---All Kinds of Capacitors

In a way, a capacitor is a little like a battery. Although they work in completely different ways, capacitors and batteries both store electrical energy. If you have read How Batteries Work, then you know that a battery has two terminals. Inside the battery, chemical reactions produce electrons on one terminal and absorb electrons on the other terminal. A capacitor is much simpler than a battery, as it can't produce new electrons -- it only stores them.

In theory, the dielectric can be any non-conductive substance. However, for practical applications, specific materials are used that best suit the capacitor's function. Mica, ceramic, cellulose, porcelain, Mylar, Teflon and even air are some of the non-conductive materials used. The dielectric dictates what kind of capacitor it is and for what it is best suited. Depending on the size and type of dielectric, some capacitors are better for high frequency uses, while some are better for high voltage applications. Suntan supply a wide range of capacitors,that can meet most of customers.

  • Suntan Plastic Film Capacitors --- Have a wide range ,such as HID lamp, ECU for engine control
  • Suntan Ceramic capacitor --- Used for high frequency purposes like antennas, X-ray and MRI machines
  • Suntan Tantalum Capacitors --- portable telephones, pagers, personal computers, and automotive electronics.
  • Suntan Gold Capacitors --- CMOS's, microcomputers, RAM's and the like used in VCR's, tuners, TV sets, telephone sets and other.

分页:[«][1][2]3[»]