Suntan Blog

This type of capacitor is a essentially a form of Polyester Film Capacitor where the Polyester Films themselves are Metallized. The advantage of using this process is that because their electrodes are thin, the overall capacitor can be contained within a relatively small package. The Metallized Polyester Film Capacitors are generally only available as leaded electronics components.

Suntan is a Hong Kong based manufacturer of Plastic Film Capacitors, including Green Polyester Film Capacitor, Metallized Polyester Film Capacitor, Mini BOX Metallized Film Capacitor, X2 Capacitor, Metallized Polyester Film Capacitor and Polystyrene Film Capacitor etc.

The most common form of leaded tantalum capacitors in use today are the "solid" tantalum capacitors. They offer particularly small package sizes and as a result they have been widely used in many areas of electronics.

Leaded tantalum capacitors (solid tantalum variety) are generally small and encapsulated in epoxy to prevent damage. The capacitor marking may be written directly onto the encapsulation as figures, although many used a color coding system.

Warning: - In view of the nature of these capacitors, great care should be taken not to stress these capacitors. The polarity should not be reversed, nor should they be exposed to over-voltage conditions - even spikes. If they are exposed to these conditions then they may fail, sometimes exploding.

[1].Miniature rectangular shape.
[2].Color coded case facilitates identification of capacitance range.
[3].Designed for automatic placement in surface mount application.
[4].Designed to withstand flux baths and solder baths.
[5].Can be temporarily attached to PCB with adhesives.
[6].Can be reflow and flow soldering method.
[7].Stable characteristics over a wide frequency range.

Suntan Technology Company Limited
---All Kinds of Capacitors

The mica dielectric obviously forms the basis for silver mica capacitors. Its properties govern the performance of the silver mica capacitor. It was also one of the first dielectric materials to be used for capacitors in the early days or wireless because of its combination of stability and general physical and mechanical attributes.

For silver mica capacitors the silver electrodes are now plated directly on to the mica dielectric, although originally thin sheets of silver foil were placed between the mica dielectric. Again several layers are used to achieve the required capacitance. Wires for the connections are added and then the whole silver mica capacitor assembly is encapsulated to provide protection.

Suntan was founded as professional manufacture of Plastic Film Capacitors. The features of film capacitor are non-inductive construction, self-healing, high reliable and superior performance in high frequency applications. It is applied to filter and noise suppression circuit, pulse logic and timing circuit, DC blocking, by-passing and signal coupling in general communication equipment. The construction of film capacitor includes polyester film dielectric with vacuum-evaporated metal electrodes, radial leads of tinned wire are electrically welded to the contact metal layer on the ends of capacitor winding, epoxy resin coating. Are you interested in learning more details about Film Capacitors? Please go to visit www.suntan.com.hk for more informations.

Electrolytic capacitors are polarised and they must be connected the correct way round, at least one of their leads will be marked + or -. They are not damaged by heat when soldering.

It is easy to find the value of electrolytic capacitors because they are clearly printed with their capacitance and voltage rating. The voltage rating can be quite low (6V for example) and it should always be checked when selecting an electrolytic capacitor. If the project parts list does not specify a voltage, choose a capacitor with a rating which is greater than the project's power supply voltage. 25V is a sensible minimum for most battery circuits.

Ceramic capacitors are suitable for moderately high-frequency work (into the high hundreds of megahertz range, or, with great care, into the low gigahertz range), as modern ceramic caps are fairly non-inductive compared to the other major classes of capacitors (film and electrolytic). Capacitor technologies with higher self-resonant frequencies tend to be expensive and esoteric (typically, mica or glass capacitors).

Suntan is a Hong Kong based manufacturer of Ceramic Capacitors. Including High Voltage Ceramic Capacitors, Multilayer Ceramic Capacitors, Ceramic Disc Capacitors, Mini Type Ceramic Capacitors etc.

Suntan Technology Company Limited
---All Kinds of Capacitors

Varistor is one kinds of transient voltage suppression devices which can be used instead of transient suppression diodes, zener diode and capacitor combination. Varistor IC and other devices can protect the circuit, to prevent electrostatic discharge, surges and other transient current (such as lightning, etc.) the damage caused by them. Simply use varistors and connected to the protected circuit IC or device, when the voltage value above a certain moment, the varistor resistance decreased rapidly, conducting high current, thereby protecting the IC or electrical equipment; when the voltage is lower than the varistor voltage value, the varistor resistance high, almost open, and thus will not affect the device or the normal operation of electrical equipment.

Suntan offers Plastic Film Capacitors which are the key components of power supply units. Plastic Film Capacitors help suppress interference and simultaneously decouple semiconductors or are used as DC link capacitors. Suntan Plastic Film covers a wide range of capacitance and voltage, matching a various applications such as HID lamp, photo flash, engine control unit and LCD backlight. All products are environmentaly conscious and comply with RoHs directive.

The most common type of varistor is the Metal Oxide Varistor (MOV). This contains a ceramic mass of zinc oxide grains, in a matrix of other metal oxides (such as small amounts of bismuth, cobalt, manganese) sandwiched between two metal plates (the electrodes). The boundary between each grain and its neighbour forms a diode junction, which allows current to flow in only one direction. The mass of randomly oriented grains is electrically equivalent to a network of back-to-back diode pairs, each pair in parallel with many other pairs. When a small or moderate voltage is applied across the electrodes, only a tiny current flows, caused by reverse leakage through the diode junctions. When a large voltage is applied, the diode junction breaks down due to a combination of thermionic emission and electron tunneling, and a large current flows. The result of this behaviour is a highly nonlinear current-voltage characteristic, in which the MOV has a high resistance at low voltages and a low resistance at high voltages.

Suntan is with very good support for Multilayer Metal Oxide Chip Varistor. This products is featured with Low firing, Sliver diffusion, Grain resistance, Electrical properties and it is widely used in cellular telephones and automotive electronic subassemblies. www.suntan.com.hk  is widely introduced all kinds of electrical products.