Suntan:How to Read trimming potentiometer ?

January 30, 2012 Views
Comments 0

To read a potentiometer, you need a multimeter. Put in on the proper ohmmeter setting, which should be higher than that of the resistance rating of the potentiometer as noted on the package or the device. If you don't know the resistance rating, use the lowest setting of the multimeter and increase it until you get a reading.
When reading the potentiometer, one multimeter lead must always be on the wiper or middle part, and the other one can be on either of the remaining terminals. For example, place one multimeter lead on the wiper, and the other on the left terminal of the potentiometer. If you place one lead on the left terminal and the other on the right, you will read the entire value of the pot, and the resistance will not vary when you turn the knob.
Note that Inexpensive ones may approximate only fifty percent of their rated value when they are measured.
we can offer all kinds of trimming potentiometers accept very small quantity with very competetive price, the delivery time is 2 weeks around. With our good support, our sales is keep increasing each month.Any questions ,please contact us at once.

More..Trimming PotentiometerSuntan Trimming Potentiometer  

Suntan :How does a Trimming Potentiometer work?

January 16, 2012 Views
Comments 0

Trimming Potentiometers come in different types.
Rotary and trimming potentiometers are wire wound, and are single or multi-turn, depending on the number of times the knob may be turned. The resistance is lowered or increased by turning the knob clock or counterclockwise, where the knob direction is dependent on the end that is used with the wiper.Faders or sliders as they are also known, have a rectangular shape, and the wiper moves back and forth in a linear fashion.
 
Potentiometers work by having a resistive element inside. Both end terminals are attached to it, and do not move. The wiper travels along the strip when the knob is turned. The closer the wiper is to the end terminal it is wired in conjunction with, the less the resistance, because the path of the current will be shorter. The further away it moves from the terminal, the greater the resistance will be.

The symbol for a potentiometer is the same one as a resistor, save for an arrow in the middle. In a circuit where they are used strictly as variable resistors or rheostats, only two terminals are wired to the other components. All three terminals are wired separately when they function as voltage dividers. Light dimmers in houses and volume controls on electronics are two common applications. Others include switches and position sensors.
 
Suntan Trimming Potentiometers selling keep increasing
Suntan can offer all kinds of Trimming Potentiometers, as below:TSR-3006 - Rectangular Trimming Potentiometers TSR-3323 - 7 Terminal Square Trimming Potentiometers TSR-3296 - 5 Terminal Square Trimming Potentiometers TSR-3362 - 9 Terminal Square Trimming Potentiometers TSR-3386 - 8 Terminal Square Trimming Potentiometers.

More..Trimming PotentiometerSuntan Trimming Potentiometer  

Suntan Trimming Potentiometers Introduction

January 13, 2012 Views
Comments 0

 

Suntan Trimming  potentiometer is an electrical component with a variable resistance.

In electrical engineering parlance, the term "potentiometer" is used in either one of two ways. It may refer to an instrument that measures an unknown emf or voltage by comparing it to a standard emf. In this capacity, it is functioning as a null instrument; it permits precision measurement by adjusting a value of a circuit element until a meter reads zero. Alternatively, "potentiometer" may refer to an electronic component that is used to vary resistance in a circuit.


A potentiometer is also referred to as a variable resistor or pot. They have three terminals, where the one in the middle is known as the wiper, and the other two are known as ends. The wiper is a movable contact where resistance is measured with respect to it and either one of the end terminals.

They are useful for circuits where the resistance needs to be dynamically changed to control the current. They are also popular as voltage dividers .

Suntan is a Hong Kong based manufacturer of Trimming Potentiometers of different types. Including SMD Trimming Potentiometers, Rectangular Trimming Potentiometers, Wirewould Trimming Potentiomers, Phenolic Trimming Potentiometers . Please refer to below product image  of Trimming Potentiometers.
 

More..Trimming PotentiometerSuntan  Trimming Potentiometers  

Suntan Polypropylene metallized film capacitors

January 2, 2012 Views
Comments 0

Suntan Polypropylene metallized film capacitors offer many advantages in large power applications. Their low dielectric loss and superior breakdown voltage strength make them highly suitable as a preferred alternative to aluminum electrolytic capacitors.
1.Much higher current per capacitance.
2.Higher voltage
3.Long lifetime
4.Higher capability to withstand overvoltages
5.No acid inside
Applications: solar and wind power inverter, Electric Vehicles, Motor drivers, Welders, UPS, induction heating.
Suntan is a Hong Kong based manufacturer of Plastic Film Capacitors, including Green Polyester Film Capacitor, Metallized Polyester Film Capacitor, Mini BOX metallized Film Capacitor, X2 Capacitor, Metallized Polyester Film Capacitor and Polystyrene Film Capacitor etc. If you are interested in any item, please let us know.We offer the services to customers include:
1.Cost-effective products
2.Ship-to-Stock Deliveries
3.Fast Delivery

More..Plastic Film Capacitor

分页:[«]1[»]