Suntan Safety Ceramic Capacitor TS22–X1/Y

September 24, 2021 Views
Comments 0

Suntan Technology Company Limited

---All Kinds of Capacitors

This week, we would like to introduce our Safety ceramic capacitor TS22 – X1/Y , with the features as follows:
Ideal for across the line applications
Compact size
Cost effective product
Safety standards recognized

Operating Temperature Range       -25°C to +85°C
Capacitance Range 10pF TO 10000pF
Capacitance Tolerance    ±10%, ±20%, +80-20%
Rated Voltage AC 125V, 250V, 400V
SUBCLASS         CD: X1 400VAC Y1 400VAC
CE: X1 400VAC Y2 250VAC
Temperature Coefficient : 2B(Y5P)+/-10%、2E(Y5U)+22%~-56%、2F(Y5V)+22%~-82%
Dissipation Factor :  2B: 2.5% max. at 25’C and 1 KHz, 1+/-0.2 Vrms 
Insulation Resistance at 20’C 2E/2F: 2.5% max. at 25’C and 1 KHz, 1/+/-0.2 Vrms.
Dielectric Strength  10000MΩat 500VDC for 1 minute. 1500V AC for 60 seconds. (250V AC) & 4000V AC for 60 seconds. (400V AC)

Welcome to contact us to know more about our parts.


Suntan Safety Ceramic Capacitor TS22–X1/Y

Suntan Tells You A Bridge Rectifier Working Principle

March 3, 2017 Views
Comments 0

Suntan Technology Company Limited
----All Kinds of Capacitors

The half-wave rectifier and the full-wave rectifier are the most common rectification systems.

The half-wave rectifier uses a single diode to simply remove half of the sinusoidal wave. It produces a directional output with a pulsating nature. Positive AC voltage on the cathode side of the diode is allowed to pass through. When the AC reverses, the negative input is not allowed to pass through.
The half-wave rectifier has limited uses since it is inefficient and provides only half the potential voltage. It is used in applications such as a dimmer switch on a light, reducing the voltage to half to produce the dimming effect.

The full-wave rectifier is used in situations where both the positive and negative input is required. A full-wave rectifier uses two diodes to convert the entire wave of AC input into a constant positive voltage. The resulting DC voltage pulsates at twice the frequency of the AC input. A filter is often used to smooth the DC output. A variation of the full-wave rectifier uses four diodes in a bridge, called a full-wave bridge rectifier, in situations where higher power output is required.

Suntan Su Bridge Rectifiers UL No.E347215

April 2, 2013 Views
Comments 0

Suntan Technology Company Limited
---All Kinds of Capacitors

Suntan is a Hong Kong based manufacturer of bridge rectifiers. Dedicated to developing, producting and marketing a full range of bridge rectifier which all are UL recognized and have our own registered brand Su, that can be easily customized to fit your circuit requirements.

Bridge rectifiers change AC voltage into DC voltage. They are used in a wide variety of electronics and most often found in AC powered devices, modern home telephones, simple plug-in power supplies and even in high horsepower motor controllers. Many modern devices have benefited from these solid-state silicon semiconductor devices, as they have replaced the failure-prone metal oxide rectifiers used many years ago.

Su Bridge Rectifiers List: UL No.E347215

 ABS2-ABS10    GBU4005-GBU410
W005-W10 GBJ6005-GBJ610
DB101-DB107 BR25005-BR2510
DB101S-DB107S BR25005W-BR2510W
MB2S-MB10S KBPC25005-KBPC2510
RS201-RS207 KBPC25005W-KBPC2510W
KBL4005-KBL410 KBPC35005-KBPC3510
KBU6005-KBU610 KBPC35005W-KBPC3510W
KBJ6005-KBJ610 SKBPC25005-SKBPC2516
KBP2005-KBP210 SKBPC35005-SKBPC3516

Bridge rectifiers can be either in a 'half wave' or a 'full wave' configuration. Electrolytic filter capacitors are commonly added to smooth the rectification pulsations. The device can also be used for assuring that DC (battery) power happens in a fixed way even if the battery is connected improperly. In modern telephones, they assure proper connectivity and electrical isolation to the incoming phone lines. Even if the phone wires are miswired, the phone will still work properly.

Welcome you to visit our website :  for more details .