Suntan Telles You What Are Typical Start Capacitor Ratings

October 13, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
Most start capacitor applications use a rating of 50-1200 uf capacitance and voltages of 110/125, 165, 220/250 and 330 VAC. 
They are also usually always 50 and 60 Hz rated. Case designs are typically round and cast in black phenolic or Bakelite materials. 
Terminations are usually ¼" push on terminals with two terminals per connection post.
 
For more details please check :

More..Motor CapacitorsSu  Suntan  Start Capacitor  Aluminum Electrolytic Capacitors  TS13D3-CD60  

Suntan Telles You What is a Start Capacitor Used For

October 8, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
A start capacitor is used to briefly shift phase on a start winding in a single phase electric motor to create an increase in torque. 
Start capacitors possess a very large capacitance value for their size and voltage rating. 
As a result, they are only intended for intermittent duty. 
Because of this, start capacitors will fail after being left energized for too long due to a faulty starting circuit on a motor.
 
For more details please check :

More..Motor CapacitorsSu  Suntan  Start Capacitor  Aluminum Electrolytic Capacitors  TS13D3-CD60  

Suntan Motor Capacitors Specification Overview Part III

October 6, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
7、Start vs Run Capacitors
Start capacitors give a large capacitance value necessary for motor starting for a very short (seconds long) period of time. They are only intermittent duty and will fail catastrophically if energized too long. Run capacitors are used for continuous voltage and current control to a motor's windings and are therefore continuous duty. They are generally of a much lower capacitance value.
 
8、Are start and run capacitors interchangeable?
Yes and no. In unusual circumstances, a run capacitor could be used as a start capacitor, but the values available are much lower than the values usually available for dedicated start capacitors. The capacitance and voltage ratings would have to match the original start capacitor specification. A start capacitor can not ever be used as a run capacitor, because it could not handle current continuously (only a couple of seconds).
 
 

More..Motor CapacitorsSu  Suntan  Motor Capacitors  TS11  CBB65  TS13D3-CD60  Run Capacitors  Start Capacitors  

How to Order Suntan TSV Dipped Varistor

October 2, 2015 Views
Comments 0

Suntan Technology Company Limited
---All Kinds of Capacitors

Product Category

Product Description

Varistor

Dipped Varistor

How to Order Suntan Products

Example: P/N

Example: Item Description

TSV07D431KR

Zinc Oxide Varistor 7mm 430V +/-10% rms:275VAC RoHS

Production Type:

TSV

Element DIA. Code:

07

Disc Type:

D

Varistor Voltage:

430V

Tolerance:

±10%(K)

Packing:

Blank for Bulk ; A for Ammo ; T for Tape & Reel

Remark:

R(RoHS)

More products details please check : http://www.suntan.com.hk/pdf/Varistor/TSV.pdf
More part number details please check : http://www.suntan.com.hk/guide.pdf

More..Suntan VaristorSu  Suntan  TSV  Dipped Varistor  part number  

Suntan Motor Capacitors Specification Overview Part II

September 29, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
4、Connection terminal style
Nearly every capacitor will use a ¼" flag style push-on connector. The next question is, "How many terminals per terminal post are needed for the application motor?" Most start capacitors have two terminals per post, and most run capacitors will have either 3 or 4 terminals per post. Verify that your selected capacitor has at least the number of connection terminals per connection post as the original motor capacitor.
 
5、Case shape
Nearly all start capacitors have a round case. Round run capacitors are by far the most common, but many motors still use oval designs. Electrically speaking, there is no difference. Fit is the only question here. If space in the mounting box is not limited, the case style does not matter.

6、Case size
Just like case shape, overall size makes no difference electrically. Select a capacitor that will fit within the space provided.

 

More..Motor CapacitorsSu  Suntan  Motor Capacitors  Connection terminal style  Case shape  Case size  TS11  CBB60  

How to Order Suntan TSR-3006P Trimming Potentiometers

September 24, 2015 Views
Comments 0

Suntan Technology Company Limited
---All Kinds of Capacitors

Product Category

Product Description

Trimming Potentiometers

Rectangular Trimming Potentiometer 3006P

How to Order Suntan Products

Example: P/N

Example: Item Description

TSR-3006P-503R

Trimming Potentiometer 3006P series 50,000 Ohm RoHS

Model:

TSR-3006

Style:

P

Resistance Code:

503

Remark:

R(RoHS)
More part number details please check : http://www.suntan.com.hk/guide.pdf

More..Trimming PotentiometerSu  Suntan  TSR-3006P  Trimming Potentiometers  part number  

Suntan Motor Capacitors Specification Overview Part I

September 22, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
1、Voltage
Usually choose a capacitor with a voltage rating at or above the original capacitor, 10% higher is preferable. If you're using a 370 voltage capacitor, a 370 or 450 voltage one will work fine in the application.
The 450 volt unit will actually last longer. A capacitor will have a marked voltage indicating the acceptable operating voltage for usually working (working voltage), not peak voltage.

2、Capacitance
Select a capacitor with a capacitance value (given in MFD, uf or microfarad) that is equal to the original capacitor. Do not deviate from the original value, as it sets the operational characteristics of the motor capacitors.

3、Frequency (Hz)
Select a capacitor with the Hz rating of the original. Nearly all replacement capacitors will be labeled as 50/60Hz .

More..Motor CapacitorsSu  Suntan  Motor Capacitors  Voltage  Capacitance  Frequency  TS11  CBB61  

Suntan Better Offer on Mini Box (Pitch:5mm) Film Capacitors 100V Ammo Package

September 17, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
Suntan Metallized Polyester Film Capacitor-Mini Box TS05 series.

Reference Standard

GB7332 (IEC 60384-2)

Operating Temperature Range

-55°C~+105°C

Rated Voltage

50V/63V, 100V, 250V, 400V, 500V, 630V

Capacitance Range

0.0010μF ~ 1.5μF

NON – INDUCTIVE, PLASTIC CASE AND EPOXY RESIN
We offer better price on following parts now. Please check with our sales team sales@suntan.com.hk freely.
 
1000pF 100V +/-5% P:5mm Ammo package
1500pF 100V +/-5% P:5mm Ammo package
2200pF 100V +/-5% P:5mm Ammo package
3300pF 100V +/-5% P:5mm Ammo package
4700pF 100V +/-5% P:5mm Ammo package
6800pF 100V +/-5% P:5mm Ammo package
0.01uF 100V +/-5% P:5mm Ammo package
0.015uF 100V +/-5% P:5mm Ammo package
0.022uF 100V +/-5% P:5mm Ammo package
0.033uF 100V +/-5% P:5mm Ammo package
0.047uF 100V +/-5% P:5mm Ammo package
0.068uF 100V +/-5% P:5mm Ammo package
0.1uF 100V +/-5% P:5mm Ammo package
0.12uF 100V +/-5% P:5mm Ammo package
0.15uF 100V +/-5% P:5mm Ammo package
0.22uF 100V +/-5% P:5mm Ammo package 
0.27uF 100V +/-5% P:5mm Ammo package
0.33uF 100V +/-5% P:5mm Ammo package
0.47uF 100V +/-5% P:5mm Ammo package
0.56uF 100V +/-5% P:5mm Ammo package
0.68uF 100V +/-5% P:5mm Ammo package
0.82uF 100V +/-5% P:5mm Ammo package
1uF 100V +/-5% P:5mm Ammo package

More..Plastic Film CapacitorSu  Suntan  Metallized Polyester Film Capacitor  Mini BOX  TS05 series  Operating Temperature Range  rated voltage  

Suntan Offers More Higher Voltage Ceramic Capacitors (6,000 Volts – 20,000 Volts) Now

September 15, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
Suntan high voltage ceramic capacitor is used for coupling, and by-pass circuit, stable and high reliability products.
General offer is 1,000 Volts – 6,000 Volts. Now more higher voltage 10,000 Volts, 15,000 Volts, 20,000 Volts are available.
More details please contact our sales team at sales@suntan.com.hk.

More..Ceramic CapacitorSu  Suntan  Higher Voltage  Ceramic Capacitors  TS16  6000 Volts – 20000 Volts  

Suntan Share Quartz Crystal Manufacturing Process

September 11, 2015 Views
Comments 0
Suntan Technology Company Limited
---All Kinds of Capacitors
 
There are several stages to the manufacture of quartz crystals. Essentially the manufacture of the quartz crystal starts with the production of the raw crystals. 
These complete crystals pass though stages to produce the basic blanks, which are further processed to create the crystals that operate on the right frequency. 
Finally they are encapsulated and then tested to ensure that they work as required.
 
The basic manufacturing process starts with the introduction of the raw silicon, and then progresses from that point in a logical fashion.
Below is the main manufacturing process: 
 
*Growing the crystal
*Crystal cutting and lapping
*Final dimensioning and etching
*Electrodes
*Final adjustment and sealing

For more details please check :http://www.suntan.com.hk/Quartz-Crystal/
 

More..Quartz CrystalSu  Suntan  Quartz Crystal  Manufacturing Process  TSQ-HC49S  TSQ-49SMD  TSQ-49U  

分页:[«][63]64[65][66][67][68][69][70][71][72][73][74][75][76][77][»]